Kolida K1


  • CAD: $7,924.12

220 channels GNSS Mainboard, All Constellations supported. Inertial measurement technology, OLED screen display

SKU: K1 Category:
  • The World Known GNSS Engine

Featuring a 220 channels GNSS board which is powered by Maxwell 6 Technology, K1 can track and process all the existed satellite constellations. With the utility of BEIDOU (COMPASS) signal, the data acquisition speed and GNSS signal stability are greatly improved from old generation technology.

  • 10 Innovations to Increase Efficiency

More than 10 programs or functions were re-designed to make your work flow simpler and smoother, let you to work easier and comfortable, help you to get more reliable working result.

  • More Durable and Rugged 

K1 is fully sealed, has a IP 68 level proof.  The built-in battery has 10,000 mAh capacity and can work 8 to 14 hours as RTK rover, with only one recharge.

  • Work Safer and Easier

Thanks to the inertial measurement technology, K1 allows user to do a tilt survey with a maximum tilt angle of 60 °. Centering is not a must, so surveyors can stay in safe position when they measure on motorway, and don’t need to step into water .

  • Fast and accurate 

Not like tilt sensor, Inertial Measurement Unit is no more affected by the earth’s magnetic field and requires no correction. It can be activated and start working within only few seconds, this fast positioning will increase measurement speed by over 30%.  The combination algorithm of IMU + GNSS can get fixed solution faster and keep measurement results more stable, accuracy is down to 2cm.

  • Measure where others can’t

Corner of wall? Points underneath pipe? Points occupied by car? These targets are no more accessible..

  • Long Range Radio Link

SDL400 built-in radio can send signal as far as 7 km in urban area, 8 km in suburban. The maximum coverage is up to 200 sq.km, suitable to have multiple rovers work simultaneously.

  • Barrier-Free Measurement

In difficult environment you may lost connection with base station or VRS network. Don’t be disappointed, you can choose from 3 creative work modes to continue surveying without interruption. (Repeater/ Router/ Mobile Refenrence Station)


Additional information

Weight 1.33 kg
Dimensions 163 × 163 × 960 mm



Kolida - Geomatics Gear - info@geomaticsgear.com - Call 1-888-410-1210. Equipment and software solutions for conventional, GNSS, UAV/drone, LiDAR, GIS, mapping and hydrographic equipment


Satellite Tracking Ability
Channels220   ConstellationGPS, GLONASS, BEIDOU, GALILEO, SBAS, QZSS MSS L-BandFunction preserved
Positioning Output Rate1Hz-50Hz Initialization Time<10s
Positioning Precision
UHF RTKHorizontal ±8mm + 1 ppmVertical      ±15mm + 1ppm Network RTKHorizontal ±8mm + 0.5ppmVertical      ±15mm+0.5ppm RTXHorizontal ±2cmVertical      ±5cm 
Static and Fast StaticHorizontal ±2.5mm + 0.5ppmVertical      ±5mm + 0.5ppm RTK Initialization Time


User Interaction
Operation SystemLinux Screen Display1 inch OLED
Voice GuideYes Data Storage

8GB internal; up to 32GB external.

Web UIYes
Working Capability
RadioBuilt-in emitting and receivingTypical working range 1-8km Tilt Survey
Inertial Measurement
Electronic BubbleYes
Endurance>14 hours (static mode), >7 hours (internal UHF base mode), 8 to14 hours (rover mode) OTG Function (Field Download)


Other Function

Mobile Reference Station, Repeater, Router

Brochure Download

Download Brochure


There are no reviews yet.

Be the first to review “Kolida K1”